62 lines
3.4 KiB
Markdown
62 lines
3.4 KiB
Markdown
|
|
To flash the Sonoff ZBDongle-E, follow these detailed steps using the web-based flashing tool. This guide assumes you want to enable the device for use with Zigbee and potentially Thread functionalities.
|
|
|
|
## Step-by-Step Flashing Guide
|
|
|
|
### 1. **Gather Required Materials**
|
|
- **Sonoff ZBDongle-E**: Ensure you have the dongle ready.
|
|
- **Computer**: A PC or Mac with a USB port.
|
|
- **Firmware File**: Download the appropriate firmware for the ZBDongle-E from a reliable source (e.g., GitHub repository).
|
|
- **Web Browser**: Use a Chromium-based browser like Chrome or Edge.
|
|
|
|
### 2. **Download Firmware**
|
|
- Go to the GitHub page for Sonoff firmware and download the latest firmware for the ZBDongle-E, such as the Ember firmware or any other desired version ([GitHub Repository](https://github.com/itead/Sonoff_Zigbee_Dongle_Firmware/tree/master/Dongle-E/NCP_7.4.3)).
|
|
|
|
### 3. **Connect the Dongle**
|
|
- Disconnect the ZBDongle-E from any device.
|
|
- Plug it into your computer's USB port.
|
|
|
|
### 4. **Access the Flashing Tool**
|
|
- Open your web browser and navigate to the [Silicon Labs Firmware Builder](https://darkxst.github.io/silabs-firmware-builder/).
|
|
|
|
### 5. **Connect to the Dongle**
|
|
- Scroll down to find the section for ZBDongle-E.
|
|
- Click on the **Connect** button.
|
|
- In the dialog that appears, select your Sonoff dongle from the list and click on the blue **Connect** button.
|
|
|
|
### 6. **Select Firmware for Flashing**
|
|
- After connecting, click on **Change Firmware**.
|
|
- Choose the option to **Upload Your Own Firmware**.
|
|
- Select the firmware file you downloaded earlier.
|
|
|
|
### 7. **Start Flashing Process**
|
|
- Click on **Install** to begin flashing the firmware onto your ZBDongle-E.
|
|
- Wait for the process to complete; do not disconnect or close your browser until flashing is finished.
|
|
|
|
### 8. **Completion and Power Cycle**
|
|
- Once flashing is complete, a dialog will indicate success. Click on **Continue**.
|
|
- It is recommended to power cycle your dongle by unplugging it and then reattaching it to the USB port.
|
|
|
|
### 9. **Verify Installation**
|
|
- After reconnecting, check if your ZBDongle-E is recognized by your system.
|
|
- You can also verify its functionality within your smart home setup (e.g., Home Assistant).
|
|
|
|
### Additional Notes
|
|
- If you encounter issues connecting or flashing, ensure that you have installed any necessary drivers for your operating system.
|
|
- Make sure that no other applications are trying to access the dongle during this process.
|
|
|
|
By following these steps, you should successfully flash your Sonoff ZBDongle-E, enabling it for use in various smart home applications, including Zigbee and potentially Thread networks.
|
|
|
|
Citations:
|
|
[1] https://www.creatingsmarthome.com/index.php/2024/06/14/guide-flashing-sonoff-zigbee-usb-3-0-zbdongle-e-to-use-ember-firmware-with-z2m/
|
|
[2] https://docs.homeseer.com/products/updating-firmware-for-sonoff-zbdongle-e-zigbee-usb
|
|
[3] https://dialedin.com.au/blog/sonoff-zbdongle-e-rcp-firmware
|
|
[4] https://www.youtube.com/watch?v=3mlu4YluJRs
|
|
[5] https://www.reddit.com/r/homeassistant/comments/19b6a3d/zigstar_help_flashing_sonoff_usb_dongle_pluse_as/
|
|
[6] https://community.home-assistant.io/t/which-firmware-for-sonoff-dongle-e-router/621819
|
|
[7] https://community.hubitat.com/t/how-to-flash-sonoff-usb-dongle-to-be-a-zigbee-repeater-router-set-transmit-power/103284
|
|
[8] https://www.smarthomejunkie.net/update-the-sonoff-zigbee-dongle-e-easily-how-to/
|
|
[9] https://community.home-assistant.io/t/flashing-sonoff-zbdongle-e-to-router-question/725973
|
|
|
|
|