my-vault/00_Inbox/Clippings/2023/03/Run an OpenWRT VM on Proxmox VE.md

page-title, url, date

page-title	url	date
Run an OpenWRT VM on Proxmox VE	https://i12bretro.github.io/tutorials/0405.html	2023-03-27 23:56:45

What is OpenWRT?

OpenWrt is an open-source project for embedded operating systems based on Linux, primarily used on embedded devices to route network traffic. The main components are Linux, util-linux, musl, and BusyBox. All components have been optimized to be small enough to fit into the limited storage and memory available in home routers. -https://en.wikipedia.org/wiki/OpenWrt

Creating the VM

1. Open a web browser and navigate to the ProxMox web UI https://ProxMoxDNSorIP:8006/
2. Click the Create VM button at the top right
3. On the General tab, name the VM OpenWRT and set a VM ID (123 in this example) > click Next
4. On the OS tab select Do not use any media and set the Guest OS Type to Linux and Version to 5.x - 2.6 Kernel > click Next
5. On the System tab click Next
6. On the Hard Disk tab set the Disk size to 0.001 > click Next
7. On the CPU tab set the number of CPU cores and the Type to host > click Next
8. On the Memory tab set the amount of memory to 256 MiB > click Next
9. On the Network tab set the Model field to VirtIO (paravirtualized), Uncheck the Firewall box > click Next
10. On the Confirm tab review the settings and click Finish
11. Select the newly created OpenWRT VM from the left navigation panel
12. Select Hardware from the left sub-navigation menu
13. Click the Hard Disk to select it
14. Click the Detach button at the top of the main content window to detach the hard disk from the VM
15. Click the Unused disk to select it
16. Click the Remove button at the top of the main content window to permanently delete it
17. Click the Add button > Network Device
18. Set the Model field to VirtIO (paravirtualized), Uncheck the Firewall box > Click Add

Setting Up the OpenWRT Disk

1. Select the Proxmox node name in the left navigation menu
2. Click Shell in the left sub-navigation
3. Run the following commands in the terminal

    \# lookup the latest stable version number  
    regex='<strong>Current Stable Release - OpenWrt (\[^/\]\*)<\\/strong>' && response=$(curl -s https://openwrt.org) && \[\[ $response =~ $regex \]\] && stableVersion="${BASH\_REMATCH\[1\]}"  
    \# download openwrt image  
    wget -O openwrt.img.gz https://downloads.openwrt.org/releases/$stableVersion/targets/x86/64/openwrt-$stableVersion-x86-64-generic-ext4-combined.img.gz  
    \# extract the openwrt img  
    gunzip ./openwrt.img.gz  
    \# rename the extracted img  
    mv ./openwrt\*.img ./openwrt.raw  
    \# increase the raw disk to 512 MB  
    qemu-img resize -f raw ./openwrt.raw 512M  
    \# import the disk to the openwrt vm  
    \# update the vm id and storage device as needed  
    \# usage: qm importdisk
    
      
    
    qm importdisk 123 openwrt.raw HDD\_500GB
    

4. Once the disk import completes, select the OpenWRT VM from the left navigation menu > Hardware
5. Double click the Unused Disk > Click the Add button
6. Select Options from the left sub-navigation menu
7. Double click Boot Order
8. Check the Enabled box next to the hard disk
9. Drag the Hard disk up in the boot order as needed, typically below the CD-ROM device
10. Click OK
11. Double click Use tablet pointer > Uncheck the Enabled box > Click OK
12. Click the Start button in the top right of the screen
13. Click the Console link to watch the boot process
14. Wait for the text to stop scrolling and press Enter
15. Run the following command to change/set the root password

**passwd**

16. Type a new root password twice to set it
17. Continue the configuration by running the following commands

**\# set the lan ip address, use something in the same subnet as your LAN  
**uci set network.lan.ipaddr='10.10.27.151'  
\# restart network services  
service network restart  
\# update openwrt packages  
opkg update  
\# install the luci web ui  
opkg install luci

18. Open a new browser tab and navigate to http://IPofVM, http://10.10.27.151 in the example
19. At the login screen, enter the username root and the password set above > Click the Login button
20. Enjoy OpenWRT running in Proxmox