[hosts/hass.windy.lan.md#8DF6]
# hass.windy.lan — Home Assistant (HAOS)

## Role and access

| Item | Value |
|---|---|
| Role | Home Assistant automation hub |
| IPv4 | `192.168.55.11` (LAN55) |
| DNS | `hass.windy.lan` (AdGuard rewrite on `dns.windy.lan`; legacy `hass.local` alias) |
| SSH | `ssh hassio@hass.windy.lan` |
| **Host** | **x88 Pro physical box** (HAOS bare-metal, `machine: green`; verified 2026-08-18) |
| Platform | Home Assistant OS; kernel `6.1.115-haos` (aarch64) |
| Core | 2026.9.3; Supervisor 2026.09.2; HAOS 18.2 (verified 2026-09-23) |
| Web UI | `http://hass.windy.lan:8123` (LAN); WAN port-forward `hass` on gw → `:8123` |

Use `hassio` for routine SSH inspection. Key-only login was verified on
2026-08-13 from the WSL client (`BatchMode=yes`).

The `ha` supervisor CLI (`/usr/bin/ha`) authenticates with `SUPERVISOR_TOKEN`.
Interactive login works because `~hassio/.zprofile` runs `exec sudo -i`, which
loads a root environment carrying the supervisor API token. Non-interactive
`ssh hassio 'command'` does not source `.zprofile` and fails with
`unauthorized: missing or invalid API token`. Run `ha` non-interactively via:

```bash
ssh -o BatchMode=yes hassio@hass.windy.lan 'sudo -n -i ha core info'
```

Verified 2026-08-13 that `sudo -n -i ha core info` works from the WSL client.
Never copy the supervisor token into this repository.

The current SSH ED25519 host-key fingerprint is
`SHA256:DMcMOgDzFsFTon1fndXowEP7jlyOK3/AX3PVK8BATvk` (verified 2026-08-13).
Verify a changed key out of band before accepting it.

Do not store Home Assistant long-lived tokens, integration credentials, or
recovery codes in this repository.

## Network

| Interface | Address / role |
|---|---|
| `end1` | IPv4 static `192.168.55.11/24` (gw `.254`, DNS `192.168.66.36`); IPv6 SLAAC `auto` (prefixes rotate on PPPoE redial; old GUAs can linger). Primary LAN55 NIC. Live name on 2026-09-23 is `end1`; the 2026-08-22 `end0` name is gone |
| `wlan0` | Supervisor **disabled** (verified 2026-08-14, W1N-104); IPv6 remains off on this RTL8821CS radio |
| `wg0` | `10.13.13.2/32`; WireGuard (add-on / integration tunnel) |
| `hassio` / `docker0` | internal HAOS Docker bridges (`172.30.32.0/23`, `172.30.232.0/23`) |

LAN55 clients reach the HTTP API on `dns.windy.lan:80` for the AdGuard Home
integration; see [hosts/dns.windy.lan.md](dns.windy.lan.md).

## API access

Home Assistant exposes a REST API at `http://hass.windy.lan:8123/api/` (same
as `http://192.168.55.11:8123/api/`). Authenticate with a **long-lived access
token** created under **Profile → Security → Long-lived access tokens**.

```bash
HA_URL="http://hass.windy.lan:8123"
HA_TOKEN="<long-lived-access-token>"

# Health check — expect {"message":"API running."} and HTTP:200
curl -sS -w "\nHTTP:%{http_code}\n" \
  -H "Authorization: Bearer $HA_TOKEN" "$HA_URL/api/"

# Read one entity state
curl -sS -H "Authorization: Bearer $HA_TOKEN" \
  "$HA_URL/api/states/sensor.csg_30d_max"

# List entities / recent errors
curl -sS -H "Authorization: Bearer $HA_TOKEN" "$HA_URL/api/states"
curl -sS -H "Authorization: Bearer $HA_TOKEN" "$HA_URL/api/error_log"
```

- `401` → token invalid or expired; create a new one.
- `404` on `/api/states/<id>` → entity does not exist.
- The token is a secret: never commit it here; keep it in the shell
  environment or a secrets file outside the repo.

### HTTP proxy gotcha (verified 2026-08-13)

The WSL client had `http_proxy` set to Mihomo (`192.168.66.99:7890`). LAN
hostnames sent **through that proxy** returned empty `502`, even though DNS
resolved and the HA UI was up. Direct `192.168.55.11:8123` worked, and
`hass.windy.lan:8123` worked only after clearing the HTTP proxy.

Before debugging a "502" on a LAN URL, check `env | grep -i proxy` and bypass
the proxy:

```bash
unset http_proxy HTTP_PROXY all_proxy ALL_PROXY
curl -sS -w "\nHTTP:%{http_code}\n" \
  -H "Authorization: Bearer $HA_TOKEN" "$HA_URL/api/"
```

For a persistent fix, add `.windy.lan` (leading dot) and the LAN ranges to
`NO_PROXY`, or add `*.windy.lan` to the proxy's own bypass/skip-proxy list.
See `~/.config/zsh/env/local/environment.env` for the client-side setting.

## Safe verification

```bash
ssh -o BatchMode=yes hassio@hass.windy.lan 'hostname; ip -4 addr show end1'
```

From a LAN client, confirm DNS and UI reachability:

```bash
getent hosts hass.windy.lan
# expect 192.168.55.11
```

## Local patches (custom components)


### Manual custom-component install (this host)

Home Assistant loads custom integrations from
`<config>/custom_components/<domain>/` (HAOS: `/config` ≡ `/homeassistant`).
A folder named after the integration domain, containing at least
`manifest.json` and `__init__.py`, is enough; Core must be restarted after
copying files. Official HA lookup order:
`<config>/custom_components/<domain>` then built-in
`homeassistant/components/<domain>`.
See [Integration file structure](https://developers.home-assistant.io/docs/creating_integration_file_structure).

This host **does not git-clone** custom components. The live tree is a file
copy. Do not `git pull` on HA.

**Official plugin path** (from
[windyboy/china_southern_power_grid_stat README](https://github.com/windyboy/china_southern_power_grid_stat)):
HACS **or** [手动下载安装](https://github.com/windyboy/china_southern_power_grid_stat/releases).
This host uses the latter. Releases here have no uploaded zip assets; use
GitHub's **Source code (zip)** / zipball of the tag.

**UI (Samba / File editor / Studio Code Server):**

1. Download Source code (zip) from the GitHub Release.
2. Extract. Copy only the inner
   `custom_components/china_southern_power_grid_stat/` tree — not the repo
   root, not a nested extra folder.
3. Place it at `/config/custom_components/china_southern_power_grid_stat/`.
4. Restart Core (**Settings → System → Restart**).
5. First install only: **Settings → Devices & services → Add integration**.

**SSH from the workstation** (verified 2026-08-14, W1N-107). Replace `v1.3.1`
with the tag being installed:

```bash
TAG=v1.3.1
STAGE=/tmp/csg-${TAG}-deploy
mkdir -p "$STAGE"
gh api "repos/windyboy/china_southern_power_grid_stat/zipball/${TAG}" \
  > "$STAGE/src.zip"
unzip -q "$STAGE/src.zip" -d "$STAGE"
SRC=$(find "$STAGE" -type d -path '*/custom_components/china_southern_power_grid_stat' | head -1)
# expect .../custom_components/china_southern_power_grid_stat

ssh -o BatchMode=yes hassio@hass.windy.lan \
  'sudo -n -i mkdir -p /homeassistant/.csg-backups &&
   sudo -n -i cp -a /homeassistant/custom_components/china_southern_power_grid_stat \
     /homeassistant/.csg-backups/china_southern_power_grid_stat.bak-$(date +%Y%m%d)-manual'

rsync -a --delete \
  -e 'ssh -o BatchMode=yes' \
  "$SRC/" \
  hassio@hass.windy.lan:/homeassistant/custom_components/china_southern_power_grid_stat/

# --delete cannot remove Core-owned __pycache__; wipe as root, then restart
ssh -o BatchMode=yes hassio@hass.windy.lan \
  'sudo -n -i rm -rf /homeassistant/custom_components/china_southern_power_grid_stat/__pycache__ \
     /homeassistant/custom_components/china_southern_power_grid_stat/*/__pycache__ &&
   sudo -n -i ha core restart'
```

Wait until Core is up (`ha core info` returns, typically 1–2 min; this CLI
build does not print a `state:` field).
Then:

```bash
ssh -o BatchMode=yes hassio@hass.windy.lan \
  'sudo -n -i cat /homeassistant/custom_components/china_southern_power_grid_stat/manifest.json'
# version must match the tag

ssh -o BatchMode=yes hassio@hass.windy.lan \
  'sudo -n -i ha core logs -n 2500' | grep -E 'china_southern_power_grid_stat|cannot pickle' || true
```

**Host constraints (do not skip):**

- Backups **must** live in `/homeassistant/.csg-backups/`. A `*.bak-*`
  directory next to the live folder is scanned as the same domain and Core
  fails with `No module named '...bak-YYYYMMDD-...'`.
- Do not install this fork via HACS on this host. HACS still tracks
  `CubicPill/china_southern_power_grid_stat` `v1.2.0`; a HACS update would
  overwrite the live copy.
- First poll after restart can time out to CSG over IPv4; if this-month
  sensors stay `unknown` while last-month filled, reload the config entry
  (UI: integration → Reload, or supervisor
  `POST /core/api/config/config_entries/entry/<id>/reload`).
- `runbooks/scripts/ha-maintenance.sh --restart-core --yes` can print
  nothing and exit 1 in under a second **without restarting Core**. The
  wrapper's ssh line discards stderr (`2>/dev/null`); with `pipefail`,
  an ssh failure yields empty stdout + exit 1 before any remote command
  runs. Do not treat that as a completed restart. Confirm with elapsed
  time (~2 min for a real restart) and `ha core info`. Prefer
  `ssh -o BatchMode=yes hassio@hass.windy.lan 'sudo -n -i ha core restart'`.

Full command family: [runbooks/home-assistant-maintenance.md](../runbooks/home-assistant-maintenance.md).

### `china_southern_power_grid_stat` live tree

**v1.3.2** (`934f58c`, verified 2026-08-15, W1N-118): manual zipball of
GitHub release
[v1.3.2](https://github.com/windyboy/china_southern_power_grid_stat/releases/tag/v1.3.2)
copied to `/config/custom_components/china_southern_power_grid_stat`.
Earlier trees: v1.3.1/`55a293fc` (W1N-107), v1.3.0/`69f13c90` (W1N-106),
`a433e8c` (W1N-105), `de01914` (W1N-103), `eb8b174` (W1N-102). Backups:
`/homeassistant/.csg-backups/` (w1n102/104/105/106/107/118).

v1.3.0 crashed the coordinator on first refresh
(`TypeError: cannot pickle 'mappingproxy' object` in
`copy.deepcopy(self._config)` under Python 3.14 / HA 2026.8.1). v1.3.1
wraps those `deepcopy` calls with `dict(...)`. Post-restart 22:13 CST:
entry `loaded`, no pickle traceback. Native this-month sensors filled after
reloading entry `01KGCQDSZCF523A9X6SV3BZ1B9` (`ip_family: ipv4`). Native
cost/ladder sensors can stay `unknown` because CSG
`get_month_daily_cost_detail` returns a marketing-system SQL error; the
dashboard uses template ladder/cost entities instead. Do not change
`templates/csg_sensors.yaml` or the 电力监控 dashboard for an install.

**`templates/csg_sensors.yaml` hardened 2026-08-29 (W1N-239):** added
`availability` templates to all 12 `csg_*` sensors (numeric sensors can't
render `unknown`/`unavailable` in `state`; availability suppresses
rendering instead — native CSG down ⇒ derived sensors show `unavailable`,
no more fake zeros / "一档" / `0%`). `csg_yesterday_kwh` now falls back to
`last_month_by_day`'s last entry when `this_month_by_day` is empty (month
start); ladder constants (`t1/t2/p1/p2/p3`) deduped into per-block
`variables:` (Block B + Block D); `csg_mom_change` parses `date`
defensively. Backup:
`/homeassistant/.csg-backups/csg_sensors.yaml.bak-20260829-w1n239`.
**Verified:** `ha core check` OK; Core restart required (trigger-based
template blocks don't settle on `template.reload` — W1N-114 precedent);
post-restart all 12 entities numeric & consistent (302.47 kWh→180.28 元,
324.03 kWh→194.06 元, mom_change -3.6%, yesterday 7.66 kWh/2026-08-28),
no template errors in Core logs.

**`csg_sensors.yaml` off-by-one fixed 2026-08-29 (W1N-241):** CSG data
lags 1 day (`sum(this_month_by_day)` == `this_month_total_usage`, data
stops at yesterday), but templates used `now().day` as "days elapsed" →
`csg_predicted_usage` underestimated ~1 daily avg (~3%) and
`csg_mom_change` compared this-month 28 days vs last-month 29 days
(-3.6% vs true -0.3%). Both now derive the day number from
`this_month_by_day[-1].date` (fallback `now().day` when empty). Added
`sensor.csg_this_month_daily_avg` (month-to-date avg, 302.47/28=10.8) and
`sensor.csg_prediction_progress` (usage/predicted %, 90.3) in Block C
(trigger adds `csg_predicted_usage`). Backup:
`/homeassistant/.csg-backups/csg_sensors.yaml.bak-20260829-w1n241`.
**Verified (8/29):** predicted 324.03→334.81, mom_change -3.6→-0.3,
daily_avg 10.8, progress 90.3, predicted_cost 194.06→200.94 (334.81 kWh
ladder), ladder cost 180.28 unchanged, `ha core check` OK after restart,
no template errors; 14 csg_* entities total.

**电力监控面板（`lovelace.dashboard_unknown` / view `power-monitor`）
updated 2026-08-29 (W1N-240 + W1N-242):** 「本月累计」gauge 对齐夏季阶梯：
`max:650`、segments `0/260/600`（绿/橙/红 = 一/二/三档）。冬季档不要再手改，由下方 v4 的 `binary_sensor.csg_summer_tariff` 切换。「📊 统计
数据」卡新增本年/去年 4 行（原生传感器，口径标注「电费(账单)」、本年
「(至今)」）+ 本月日均/预测进度 2 行（`csg_this_month_daily_avg` /
`csg_prediction_progress`，W1N-242）；面板共引用 **20** 个实体。改前备份：
`/homeassistant/.lovelace-backups/dashboard-unknown-power-monitor-20260829-204845.json`
（W1N-240）、`-20260829-210708.json`（W1N-242）
（改法：WS `lovelace/config/save`，参数 `url_path: dashboard-unknown` +
`config`；勿直改 `.storage/`）。验证：WS 读回 18→20 实体 diff ✓、gauge
配置一致 ✓、URL `http://hass.windy.lan:8123/dashboard-unknown/power-monitor`。

**`csg_sensors.yaml` W1N-242:** `csg_predicted_usage` /
`csg_mom_change` / `csg_this_month_daily_avg` 三处取 `days[-1]` 前补
`sort(attribute='date')`（与 `csg_yesterday_kwh` 一致，防上游乱序取错
数据日）。备份 `csg_sensors.yaml.bak-20260829-w1n242`。验证：Core
restart 后回归值不变（334.81 / -0.3 / 10.8 / 90.3 / 200.94 / 180.28）。

**CSG 面板重构 2026-09-04（VPS-90；面板布局已被下方 2026-09-22 v4 取代。仍有效的是均价传感器和两条季节提醒）:** 核对
`power-monitor` 计价与 8 月账单一致（198.65 vs 账单 198.64，差 ≤0.01 元，
因模板用公众圆整价 0.589/0.639/0.889、账单用 6 位精确价），不改阶梯常量。
改动：① `csg_sensors.yaml` Block B 新增
`sensor.csg_this_month_avg_price`（本月阶梯电费÷本月用电，`元/kWh`，
availability 照 W1N-239 惯例；**csg_* 实体 14→15**）；② 面板改名「环比上月」
→「环比上月同期」；glance「本月/上月」grid 去重为单卡「上月」（本月用电/电费
行归 💰核心数据卡）；⚡阶梯电价卡加「本月实际均价」行（当前档位/当前电价/
本月实际均价/档位剩余；面板唯一实体引用 20→21）；③ `automations.yaml` 加
2 条提醒：`automation.csg_mian_ban_qie_dong_ji_dang_ti_xing`（10-25 09:00）
与 `automation.csg_mian_ban_qie_xia_ji_dang_ti_xing`（4-25 09:00）经
`matrix_e2ee.send_message` 提醒切 gauge。④ 金额单位混排（原生 CNY vs 模板
元）**维持**：`config/entity_registry/update` 拒绝自定义文本单位
（`extra keys not allowed … Got '元'`），用户确认接受。备份：
`.lovelace-backups/dashboard-unknown-power-monitor-20260904-204757-pre-refactor.json`、
`.csg-backups/csg_sensors.yaml.bak-20260904-204757-pre-refactor`（及
`-205301-pre-avgprice`）、`.automations-backups/automations.yaml.bak-*`。
**WS 改法**：`lovelace/config` 读、`lovelace/config/save` 写
（`lovelace/config/get` 不存在）。客户端用 [`scripts/ha-ws-client.py`](../scripts/ha-ws-client.py)，
见下方 Quick 节。勿直改 `.storage/`。验证：新实体
0.589 元/kWh、15 个 csg_* 数值齐全、回归值不变（14.09/198.65/331.22/
304.99/181.89）、automations on、`ha core check` OK、日志无 template 错误。

**CSG 面板 Sections 重构 2026-09-22（VPS-90 v4）:**
`dashboard-unknown/power-monitor` 从单列 Masonry 改为原生 Sections（最多 2 列、
关闭 dense placement），并新增子视图 `power-details`。主页按「本月概览 → 阶梯
电价 → 最新数据/季节累计 → 近 30 日趋势」组织：概览只保留本月用电/阶梯电费
与明确标为「预计」的用电/电费；余额因口径未独立验证不展示；欠费仅在
`sensor.0800041935246530_arrears > 0` 时显示。详情页承载上月、近 30 日、月日均、
环比及本年/去年账单统计；移除无决策价值的 `csg_prediction_progress` 展示。
趋势图使用 `custom:apexcharts-card` 读取 `sensor.csg_history.history_data` 最近 30 条
（该属性来源是上月 + 本月逐日明细），画日柱和 30 日均线，不接 Timescale reader；
两条 series 均显式覆盖 `unit: kWh`，避免继承 `sensor.csg_history` 的记录数单位
「条」。用户首轮目视反馈后，「最新数据与本月进度」改为跨两栏：最新日用电与
本月日均各占桌面半栏，当前季节 gauge 全宽，窄屏由 Sections 自动回落堆叠。
外部实施审核收口时补齐预测不确定性标识：两张 Tile 分别命名为
「预计本月用电（估算）」/「预计本月电费（估算）」，且「本月概览」副标题明确
写明「预测按当前速率推算，月内会调整」；仅改展示文案，不改计算或实体。

季节 gauge 由 UI Template Helper 自动切换：配置入口
`01M337A71HTAEBF8AB769J02WF`（domain `template`，title
`CSG Summer Tariff`，source `user`，state `loaded`），实体
`binary_sensor.csg_summer_tariff`，状态模板
`{{ 5 <= now().month <= 10 }}`。`on` 显示夏季 `max 650 / 260 / 600`，`off`
显示冬季 `max 450 / 200 / 400`；状态既非 on 也非 off 时显示警告。现有 4-25 /
10-25 Matrix 提醒保留，不改 automation；该 helper 当前只被此 dashboard 引用。

写入前 WS 快照：
`/homeassistant/.lovelace-backups/dashboard-unknown-power-monitor-20260922-0815-pre-sections-v4.json`
（4953 bytes，SHA-256
`f5e3e05ab29a4c13b870547b0a189e95b793d85e82c85c61190dedf66811a874`）。
首轮 v4 到布局/单位修正前的第二快照：
`/homeassistant/.lovelace-backups/dashboard-unknown-power-monitor-20260922-0825-pre-layout-unit-fix.json`
（SHA-256 `8b56e1303572405d7c850305ffd435cc5c7ca583330160fdd3f8b213473e1fcd`）。
外部审核文案修正前的第三快照：
`/homeassistant/.lovelace-backups/dashboard-unknown-power-monitor-20260922-0838-pre-estimate-copy-fix.json`
（文件 SHA-256 `b1c1e0c6946818ce7fb44d5d731e3e78aebe9c8d51ed465ce8505a0f1855c05c`）。
验证：`lovelace/config/save` 后规范化 JSON 哈希与 payload 一致；22 个引用实体全部
存在且无 unknown/unavailable；夏季 helper=`on`；图表 30 条为 2026-08-22 至
2026-09-20，重算均值 9.15 kWh 与 `sensor.csg_30d_avg` 一致；最终文案修正后的
规范化配置哈希为
`c16d11c01353f90761da5837b06cc7ad1ea7b400f249c99cf291c03f4980a28d`。浏览器没有 HA
登录态，390/768/桌面三宽度视觉验收仍待人工登录后完成。回滚时先把上述 JSON
经 WS `lovelace/config/save` 写回；再扫描 helper 引用，确认无消费者后才可删除
配置入口，勿直改 `.storage/`。

**CSG 长期归档（W1N-243, 2026-08-29；任务改号 2026-09-21；口径统一 v5 2026-09-22）:**
scribe 库 `csg_history` 表（逐日 usage/cost/ladder/balance + 逐月累计；2026-07-01 起
回填，永久），由 TimescaleDB **两个**任务维护（**均为 TS job，非 pg_cron**）：
**1010** `csg_daily_snapshot()`（14:30 UTC = 22:30 Asia/Shanghai）写当日行；
**1011** `csg_backfill_missing_days()`（15:10 UTC = 23:10 Asia/Shanghai）是
**断档自愈**——只 `INSERT` 缺失日期、`ON CONFLICT DO NOTHING`，**绝不覆盖既有行**。

> **归档逻辑全部在 pgdb 侧，不经过 HA。** HA 的 scribe 集成只往 `states_raw` 写状态，
> 上面两个任务在 pgdb 侧读 `states_raw` 落表。因此 `csg_history` 相关的口径/job 变更
> **不需要改 HA 配置、不需要重启 Core**。另注意：模板传感器
> `sensor.csg_history`（state = 天数「51 条」）读的是集成 attributes
> `this_month_by_day` / `last_month_by_day`，**与这张同名表无关**，别混淆。

**v5 口径（2026-09-22）**：数据日期与当日用量取**同一实体同一行**
`sensor.0800041935246530_latest_day_kwh`（`latest_day_date` 属性 + `value`；v3 曾用它的
属性定日期却用 `yesterday_kwh` 取值，两实体可能错配，且后者归档少一条 09-06 = 9.29）。
日费用 = `round(csg_ladder_cost_raw(c1) − csg_ladder_cost_raw(c0), 2)`，即**当月累积的
边际差分**，与 v3 回填同口径；`csg_ladder_cost_raw` 是新增的**无舍入**版助手（直接用
`csg_ladder_cost(c1) − csg_ladder_cost(c0)` 会二次舍入，7 月实测 1 天差 0.01）。月行由
`csg_ladder_cost` 单次舍入重算。**语义**：day 行 usage/cost 为该日值，ladder/balance 为
快照值；各月 `|sum(day cost) − month cost| ≤ 0.05` 元是**逐日舍入的累积**（非缺陷），
月行才是权威值。脚本 `compose/pgdb/csg-snapshot-v5.sql`，快照 `csg_history_bak_20260922`。
健康检查：[pgdb-health](../runbooks/pgdb-health.md) 第 9 项专查归档新鲜度——**上游停更时
job 会反复 upsert 同一行、`last_run_status` 仍是 `Success`、日期上也没有缺口，只有
「最新 day 行日期」这条断言能发现**。详见 [hosts/pgdb.md](pgdb.md) § Known issues
2026-09-21（1008 从未成功的根因与回填）与 **2026-09-22**（v5 口径统一 + 自愈 + 校验）。

**CSG 预测值复核（2026-09-21，只读）:** 对
`sensor.csg_*` 全部 14 个派生值用独立 Python 实现按同一输入重算，逐个与 HA
live state 完全一致（`csg_30d_avg` 9.07 / `csg_predicted_usage` 268.45 /
`csg_predicted_cost_ladder` 158.54 / `csg_this_month_ladder_cost` 99.35 /
`csg_mom_change` -21.6 等）。同时把 9 月逐日口径对回 scribe：集成
`this_month_by_day`（09-01..09-19，19 天，和 168.68）与 `states_raw` 里
`yesterday_kwh` 观测值逐日一致（唯一差异 09-06 = 9.29 是 scribe 漏采、集成有值），
确认输入数据无缺口。**因此「预测本月电费」不是算错，而是估计器的窗口问题**：
`csg_predicted_usage = 本月累计 + avg × 剩余天数`，旧版 `avg = csg_30d_avg`
（`history_data[-30:]` 的**普通 30 日均值、跨月重叠**）→ 月初被上月（更热）拖高
（09-02 实测 317.93 kWh / 190.16 元），随本月凉快日置换回落到 268.45 / 158.54，
一个月内摆动 **-17%**。**另注**：集成原生
`latest_day_cost` / `this_month_total_cost` / `last_month_total_cost` 自
2026-08-29 起**恒为 unknown**（`states_raw` 无一条有值），故面板上所有「元」
均为模板阶梯估算值，从未与账单口径对账。

**`csg_sensors.yaml` 预测速率 v2（2026-09-21，已实施）:** 只改
`csg_predicted_usage` 的速率项，`csg_30d_avg` 语义不动（面板「近30日平均」照旧）。
新公式：`avg = mtd × w + recent7 × (1 − w)`，其中 `mtd = 本月累计 / 已过天数`、
`recent7` = `history_data` 末 7 条均值、`w = min(已过天数, 14) / 14`；两者都取不到
才退回 `csg_30d_avg`。**动机**：本月至今速率按天数爬升可信度，避免月初被上月污染；
近 7 日速率兜底，因为月初唯一的新数据就是上月末。Block C 触发器加
`sensor.csg_history`。**19 天回测**（基准 = 第 19 天本月至今速率外推，逐日重放
集成 `this_month_by_day` + `last_month_by_day`）：

| 速率方案 | 预测电费摆动 | 最大偏差 | 平均绝对偏差 |
|---|---|---|---|
| 旧：30 日均值 | 21.1% | 35.99 元 | 14.04 元 |
| v2：K=7 | 14.6% | 16.81 元 | 5.65 元 |
| **v2：K=14（采用）** | **13.9%** | **15.33 元** | **4.94 元** |
| v2：K=14 但兜底用 30 日均值 | 23.3% | 33.12 元 | 6.28 元 |

（末行证实病根就是那个跨月的 30 日均值兜底。）备份
`/homeassistant/.csg-backups/csg_sensors.yaml.bak-20260921-pre-predictor`
（改前）与 `…-pre-k14`（K=7 中间态）。**验证**：`ha core check` OK；Core 重启两次
（trigger 模板块不吃 `template.reload`，W1N-114 先例）；15 个 `csg_*` 全部数值、
无 template 错误；当天 `n=19 ≥ 14` 故两版同值，面板读回
`csg_predicted_usage` 266.34 kWh / `csg_predicted_cost_ladder` 157.19 元 /
`csg_prediction_progress` 63.3%；新值已进 scribe 归档
（`states_raw` 08:17:04Z 158.54 → 08:17:10Z 157.19）。**注意**：`w` 的爬升窗口
（14 天）是回测选出来的单月参数，属弱证据，换季/换季后值得复看。

> **季节 gauge：** 不要手改 max/segments。`binary_sensor.csg_summer_tariff`
> （`on` = 5–10 月）切换夏季 `650 / 260 / 600` 与冬季 `450 / 200 / 400`，
> 见上方 VPS-90 v4。`automation.csg_mian_ban_qie_dong_ji_dang_ti_xing`（10-25）
> 与 `automation.csg_mian_ban_qie_xia_ji_dang_ti_xing`（4-25）仍会在 09:00
> 发 Matrix 提醒；提醒正文这次没核对。

Home PPPoE IPv4 to CSG is still blackholed (`curl -4` to `218.19.148.218:443`
times out). `end1` IPv6 is enabled (`ipv6.method: auto`); from HA,
`curl -6 https://95598.csg.cn` returns HTTP 200 via `240e:f9:8060::1:16`.

**`tianqi` weather recorder patch (verified 2026-08-13, W1N-75):**
`/config/custom_components/tianqi/weather.py` has a local patch adding
`_unrecorded_attributes = frozenset({"hourly_temperature", "hourly_skycon",
"hourly_cloudrate", "hourly_precipitation"})` to the `WeatherEntity` class.
Without it, weather.guangzhou's state attributes (~19 KB, dominated by the 4
hourly_* arrays of up to 48 entries) exceed the recorder 16384-byte limit, so
the recorder drops **all** attributes for the entity and logs
`Recorder.db_schema: State attributes for weather.guangzhou exceed maximum
size of 16384 bytes`. The patch excludes only the 4 arrays from recording
(live state unchanged; other attributes still stored; ~6.3 KB payload). Backup
at `weather.py.bak-w1n75`. **Re-apply after any `tianqi` component update.**
The `_unrecorded_attributes` mechanism exists in Core 2026.8.1
(`Entity.__init_subclass__` → `state_info["unrecorded_attributes"]`, consumed
by recorder `shared_attrs_bytes_from_event`).


### `matrix_e2ee` live tree (E2E Matrix bot, verified 2026-08-20)

**v0.3.12** (tag `v0.3.12`; feat — Matrix activity events
`matrix_e2ee_message_received` / `matrix_e2ee_verification_done` + push
diagnostics; v0.3.9 added Connection health binary sensor, SAS/command
allowlist split, URL normalization, single-entry enforcement):
source copy from `/home/windy/project/ha-matrix-e2ee` `ea421ed` (tag
`v0.3.12`) deployed 2026-08-20 via SSH rsync from workstation (upgraded
from v0.3.2, backup `matrix_e2ee.bak-20260820-v0.3.2`).
Custom **`matrix_e2ee`** integration — **Config Flow** (UI). See
[docs/home-assistant-matrix.md](../docs/home-assistant-matrix.md).
**Update runbook:** [runbooks/matrix-e2ee-update.md](../runbooks/matrix-e2ee-update.md).

Earlier: v0.3.2 (tag `v0.3.2`, W1N-182/#34: wizard waits for inbound SAS
emojis) deployed 2026-08-18 from `d35c484` (backup
`matrix_e2ee.bak-20260818-v0.3.1`); v0.3.1 (GitHub #33: peer-initiated
verification wizard fix) deployed 2026-08-18 from `d22e935` (backup
`matrix_e2ee.bak-20260818-v0.3.0`); v0.3.0 (W1N-180/#32: bot-initiated
verification wizard; W1N-179/#31 `receive_mac_event` cancel-state fix)
deployed 2026-08-18 from `216cc99` (backup
`matrix_e2ee.bak-20260818-v0.2.10`).

- Bot `@hass:chans.xyz` reused (E2EE device `rO1R915ncu`). Config Entry
  `01M04D7C1M4T2GX5VPG7NVQ7GV` (`source: import`, `state: loaded`). All
  settings via **Settings → Devices & Services → Matrix E2EE → Configure**.
- Config Entry options: `allowed_rooms` `["!gidvAzpDzwtzfEDrqu:chans.xyz", "!boxfylDSzOvrWkcsyY:chans.xyz"]`,
  `allowed_users` `["@zhiqiang:chans.xyz"]`, `command_prefix` `"!"`.
  **`verification_peer_users` not set** (v0.3.9+ SAS allowlist split from
  `allowed_users`, W1N-156): defaults to empty → only the bot's own account
  may drive SAS; `@zhiqiang` is denied until the option is added via
  Settings → Devices & Services → Matrix E2EE → Configure.
- Storage: `/config/.storage/matrix_e2ee_session.json` +
  `/config/.storage/matrix_e2ee_store/`. Backups:
  `/homeassistant/.matrix-e2ee-backups/` (incl. `matrix_e2ee.bak-20260820-v0.3.2`,
  `matrix_e2ee.bak-20260818-v0.3.1`,
  `matrix_e2ee.bak-20260818-v0.3.0`,
  `matrix_e2ee.bak-20260818-v0.2.10`,
  `matrix_e2ee.bak-20260816-v0.2.9`, `matrix_e2ee.bak-20260816-v0.2.8`);
  full HA backup slugs `3d9d36db` (pre-v0.1.4) + `9f223f35` (pre-v0.2.0).
- v0.3.12: Matrix activity events + push diagnostics
  (`matrix_e2ee_message_received` / `matrix_e2ee_verification_done`).
  v0.3.9: Connection health binary sensor (W1N-185/#40), config-entry
  diagnostics (W1N-184/#39), SAS/command allowlist split
  `verification_peer_users` (W1N-156/#41), SAS/sync logs demoted
  warning→info/debug (W1N-188/#38), URL normalization + single-entry
  enforcement (W1N-190/#42).
  v0.3.8: `m.key.verification.done` handshake for request-based SAS
  (W1N-183/#35).
  v0.3.2: wizard waits for inbound SAS emojis before the compare step
  (W1N-182/#34).
  v0.3.1: verification wizard waits for a peer-initiated inbound SAS instead
  of the bot starting SAS (GitHub #33).
  v0.3.0: bot-initiated device verification wizard (W1N-180/#32).
  v0.2.11: `receive_mac_event` no longer overrides canceled state (W1N-179/#31).
- v0.2.9: restore SAS emoji rendering after vodozemac migration (W1N-175/#29).
  v0.2.8: SAS commitment unpadded base64 for Element interop (W1N-174/#28).
  v0.2.7: SAS cancel code/reason logging. v0.2.6: verification state logging +
  request→ready bridge. v0.2.4: `_patch_nio_sas_timeout()` +
  `_repair_dropped_start()`; `VERIFICATION_TIMEOUT_SECONDS` 600→240.
- Automation `1761188403590`「Matrix 聊天关卫生间灯」: trigger
  `matrix_e2ee_command` (command `关卫生间灯`), actions `light.turn_off` +
  `matrix_e2ee.send_message` (room `!gidvAzpDzwtzfEDrqu`).
- **SAS not yet completed:** every device requires explicit `confirm_verification`.
  Encrypted-room commands stay fail-closed until `@zhiqiang`'s device is verified.
  Since v0.3.9 the SAS driver gate uses `verification_peer_users` (empty on
  this host) instead of `allowed_users` — add `@zhiqiang:chans.xyz` there
  before retrying the wizard. Three paths available: SAS manual confirm,
  fingerprint, or the device verification wizard (v0.3.0 bot-initiated,
  reworked in v0.3.1/v0.3.2 to wait for a peer-initiated inbound SAS from
  Element with emoji comparison), see
  [docs/home-assistant-matrix.md § Device verification](../docs/home-assistant-matrix.md).
### Scribe long-term history (3.8.0 setup 2026-08-29; 4.4.0 verified 2026-09-13)

- **Scribe 4.4.0** (`/homeassistant/custom_components/scribe/`, HACS repo
  `jonathan-gtd/scribe`, = latest stable 2026-09-12; upgraded 2026-09-13 together
  with Core 2026.9.1 / HAOS 18.2), configured from
  `/homeassistant/scribe.yaml` — W1N-238 moved the block out of
  `configuration.yaml` on 2026-08-29 (main config now carries
  `scribe: !include scribe.yaml`; content moved verbatim; backup
  `configuration.yaml.bak-20260829-201724-w1n238`). Config entry
  `01KC2VFJWEQ3XDHY6TQKHPDVRB`, `source: import` — UI "Configure → Advanced"
  edits are overridden by the YAML on restart; treat YAML as authoritative.
- TimescaleDB at `192.168.55.15:5432/scribe` (DB user `hass`; host in inventory,
  see [hosts/pgdb.md](../hosts/pgdb.md)). Database re-initialized 2026-08-29 14:06 CST
  (user-handled; earlier `relation "entities" does not exist` errors resolved).
  Health: `binary_sensor.scribe_database_connection`.
- 2026-08-29 config applied (backup `/homeassistant/configuration.yaml.bak-20260829-scribe`):
  - `record_events: true` with `include_events` whitelist: `automation_triggered`,
    `matrix_e2ee_command`, `matrix_e2ee_message_received`,
    `matrix_e2ee_verification_done`, `script_started`, `tag_scanned`,
    `mobile_app_notification_action`, `homeassistant_start`, `homeassistant_stop`.
  - State noise trimmed: `exclude_domains` update/button; glob
    `sensor.zigbee2mqtt_bridge_*`; 4 hassio cpu/mem-percent entities.
  - Global `exclude_attributes` drops tianqi `hourly_*` arrays (~19 KB/state —
    the recorder-side `_unrecorded_attributes` patch does not apply to Scribe).
  - `enable_stats_io` + `enable_stats_size` on → 14 `sensor.scribe_*` stats
    entities (`scribe_states_written`, `scribe_events_written`, rates, sizes).
  - Verified post-restart 14:23 CST: writer started, `scribe_events_written=1`
    (homeassistant_start), states ~110/min, buffer 3, no scribe log errors.
- **4.x upgrade核对 2026-09-13（只读 + 一处配置变更）**：live `manifest.json` =
  4.4.0。两个 4.0 breaking change 在本机都不需要动作——数据库是 3.x 结构
  （`states_raw` PK `(metadata_id, time)` 在，4.2.0 的启动态去重因此可用），
  TimescaleDB 2.29.2 已装。4.1.0 修了 `db_url` 优先级，YAML 里的
  `!secret scribe_url` 现在是权威。`scribe.yaml` 现有键在 4.4.0 全部仍然合法
  （未知键被忽略，`extra=vol.ALLOW_EXTRA`）。**配置优先级 YAML > entry
  `options` > entry `data` > 默认值**，而 `_resolve_settings` 读的是
  `hass.data[DOMAIN]["yaml_config"]`（只有 `async_setup` 会写），所以
  **YAML 改动必须重启 Core，reload config entry 不重读 YAML。**
- **`stats_io_interval: 300`（2026-09-13 添加**，备份
  `/homeassistant/scribe.yaml.bak-20260913-191558`）。4.4.0 不再让 HA 每 30s
  轮询 I/O 统计传感器，改由集成自己每 60s 发布，间隔成为配置项。scribe 自己的
  传感器此前是本机自写历史的主要来源（变更前 24h：11 019 / 87 461 行状态 =
  12.6%），60s → 300s 把这部分降约 5 倍（每个 I/O 传感器约 1440 → 288 行/天）。
  验证：`ha core check` OK；重启 88s；`ScribeWriter started successfully`；
  无 scribe error/warning；scribe Repairs 问题 0 条；传感器发布间隔实测正好
  300s（11:19:26 → 11:24:26 UTC）。
- **Retention 现在可用但刻意不设**：`retention_states` / `retention_events`
  （4.0.0）按间隔丢 chunk，留空 = 永久保留，符合本机定位（Scribe 是永久归档，
  recorder 保留 365 天）。注意 retention 是**绕过** entry `data` 副本读取的
  （`from_entry_data=False`），所以删掉 YAML 行即撤销策略。`db_schema`、
  `enable_rollups`、`scribe.purge` 同样未用：图表走 `sensor_minute` +
  `timescale_database_reader`（见 [hosts/pgdb.md](pgdb.md)），不吃 scribe 自己的
  视图，配置里也没有任何 `scribe.query` 调用。`flush_interval` 仍是 entry
  `data` 钉住的 5s——上游下一个版本把默认改成 30s，但 entry 值优先，要采用只能
  在 YAML 显式写 `flush_interval: 30`。
- Recorder stays external-Postgres with `purge_keep_days: 365` (W1N-243,
  2026-08-29, raised from 30 — ~300 MB/yr, 1% of the 30G pgdb disk) for
  native UI per-change history; Scribe is the permanent archive. Long-term
  statistics stay permanent (not purged by `purge_keep_days`). Note:
  extending retention does **not** recover pre-2026-08-29 raw history
  (already purged); only `csg_history` day/month values cover that period.

### Config layout: scribe.yaml + templates/ merge (W1N-238, verified 2026-08-29)

- `configuration.yaml` line 29: `scribe: !include scribe.yaml`; line 9:
  `template: !include_dir_merge_list templates`. No `packages/`.
- `scribe.yaml` (config root): the Scribe block, content identical to the
  former inline one; import semantics unchanged.
- `templates/`: `csg_sensors.yaml` (15 `csg_*` template sensors, top-level **list**)
  + `quick_sensors.yaml` (`sensor.quick_wen_cha`, same top-level list).
  **`!include_dir_merge_list` merges per-file lists; non-list files are silently skipped**
  — every file in `templates/` must be a top-level list (`- sensor:` blocks).
  Directory include only picks up `*.yaml`, so `.bak` / `.pre-*` backups in the
  dir are ignored. UI helpers such as `binary_sensor.csg_summer_tariff` are not
  in this directory. After adding sensors, count template-platform entities
  against these files plus the UI helpers, not against the old "12".
- Convention (per review + W1N-233): pure sums/averages stay min_max helpers
  (e.g. `sensor.dang_qian_zong_gong_lu`); only template-logic derivations
  (ladder pricing, cross-entity conditions) go into `quick_sensors.yaml`.
- Post-change verification 20:19 CST: `ha core check` ok, 92 s restart
  (2026.8.3), `binary_sensor.scribe_database_connection` on,
  `scribe_states_written` 18581→19426 growing, template entities still 12 that day (later 15 `csg_*` + `quick_wen_cha`),
  csg sensors numeric, no scribe/template log errors.

### Timescale Plotly card + database reader (verified 2026-08-29)

Chart stack over the Scribe TimescaleDB archive. Upstream pair (no HACS;
manual copies): reader `remmob/timescale_database_reader` **v1.1.0** (main
`bb8776a`) + card `remmob/timescale-plotly-card` **2.2.0** (main `217961d`).

- **Reader integration**: `/homeassistant/custom_components/timescale_database_reader/`.
  Config entry `01M165P77QT1FQEAVPNZHDT82W` ("Scribe", `source: user`): connects
  `hass@192.168.55.15:5432/scribe` (credentials = `secrets.yaml` `scribe_url`),
  `table: sensor_minute`. Exposes no entities/services — it serves WS command
  `timescale/query` (window ≤ 365 d, ≤ 50 000 rows, `downsample` bucket seconds).
  Benign startup warning `Error executing test query: column "time" does not
  exist`: the self-test SQL assumes the LTSS column name; the scribe table uses
  `minute` — real queries work (verified: 70 rows for a live power sensor).
- **Card**: `/homeassistant/www/community/timescale-plotly-card/timescale-plotly-card.js`
  (root-owned, same convention as HACS dirs). Lovelace resource (storage)
  id `2e360d17b5aa4ce59c2fd13c43b51215` →
  `/hacsfiles/timescale-plotly-card/timescale-plotly-card.js`, type `module`.
  Card config matches the entry by `database: scribe` (name from the reader
  entry). Updates: replace the file, resource URL unchanged — browsers need a
  hard refresh or a bumped `?v=` query on the resource URL.
- **pgdb side** (`sensor_minute_aggregate` cagg + `sensor_minute` hypertable +
  every-minute refresh job): see [hosts/pgdb.md](pgdb.md) § Databases.
- **Agent-side HA WebSocket without a long-lived token** (verified 2026-08-29):
  connect `ws://supervisor/core/websocket` with header
  `Authorization: Bearer $SUPERVISOR_TOKEN`, then send
  `{"type":"auth","access_token":"$SUPERVISOR_TOKEN"}` — the Supervisor proxy
  swaps it for a core token (works as the internal Supervisor admin user). Note
  `lovelace/resources/create` in HA 2026.8 takes `res_type` (NOT
  `resource_type`).
- Scribe stores numeric sensor values in `states_raw.value` with `state` NULL,
  so `sensor_minute.state` shows `'0'` for numeric sensors; the card plots
  `avg_state` (from `value`) — expected, not a bug.

### Quick 仪表盘（`dashboard-quick`，现行 2026-09-23）

`http://hass.windy.lan:8123/dashboard-quick`。视图 `type: sections`，`max_columns: 4`。
分区宽用 `column_span`（缺省是 1 列，不要省）。卡片宽用 `grid_options.columns`
（写在卡片上的 `column_span` 会被忽略）。空调实体是 `kong_diao_*`；`kong_tiao` 是笔误，应为 0 处。

| 分区 | span | 现在有什么 |
|---|---|---|
| 灯与开关 | 4 | 2 列网格：卫生间灯、厨房灯、客厅长明灯、厨房远灯、Matter 开关「马桶换气电源」(`switch.wei_sheng_jian_ma_tong_huan_qi_dian_yuan`)。不放 `switch.0xa4c138a4c2fe4c8b`。徽章「换气功率」= `sensor.0xa4c138a4c2fe4c8b_power` |
| 实时功率 | 2 | apexcharts donut，11 路当前功率（与下面两张功率图同一批）。末项「马桶换气」= 上面那颗 Zigbee 功率。图例在右，`chart.height` 510；card-mod 把 `ha-card` 撑到 520px。徽章「插座合计」= `sensor.dang_qian_zong_gong_lu` |
| 人体感应 | 2 | 厨房 / 卫生间 / 厨房(电池)。`state_map` 0–11，`downsample_method: last`。卡高 280，card-mod 520px，和圆环并排。默认 12h |
| 峰值负载 | 2 | 厨房电器、空调、电水壶、咖啡机、电脑。`downsample_method: avg`，高 280，默认 6h。徽章：空调、电脑。不要把约 25 W 的马桶换气放这里 |
| 基础负载 | 2 | 主网络、冰箱、大房、水设备、无线AP、马桶换气（`sensor.0xa4c138a4c2fe4c8b_power`）。卡 `fill: tozeroy`；主网络和冰箱有 `fill_color`，其余 4 条 `fill: false`。同样 `avg`、高 280、默认 6h |
| 今日用电 | 4 | `energy_mode`，11 路 kWh。末项「马桶换气」= `sensor.0xa4c138a4c2fe4c8b_energy`（`total_increasing`）。高 320，默认 today |
| 温湿度 | 4 | `sensor.quick_wen_cha`（室内均温 − 室外）+ 湿度 4 条。两张卡 card-mod 520px，默认 24h。徽章：卫生间 / 客厅 / 卧室 / 室外温度 |

功率图档 `1h,3h,6h,12h,24h,3d,7d`。人体感应档 `3h,6h,12h,24h,3d,7d`。温湿度档 `6h,12h,24h,48h,7d,14d,30d`。今日用电档 `today,week,month,3mo,custom`。`sensor_minute` 最早只到 **2026-08-29**，长于约 15 天的档前半段是空的。

「插座合计」是 min_max **sum**（entry `01M16N648QBFG13P07XQMESBSP`，`round_digits: 0`），含上面 11 路功率，不含灯。任一源掉线则 unknown。2026-09-23 读回 380 W，与 11 路之和一致。

**别按旧说明操作：**

- 功率图必须 `downsample_method: avg`。reader 对 `sensor_minute` 默认 `last`（桶末瞬时值），空调会画成停机。今日用电用累计表的 `last` 再 diff，不要改成 avg。人体感应保持 `last`。
- 卡 JS 曾把 `7d` 解析成 7 小时。2026-09-21 已改用 `parseDurationToMs`，资源 URL 带 `?v=20260921`。换 JS 后要再 bump `?v=`。命名档只有 `today|week|month|3mo|6mo|year|years|custom`。
- apexcharts 的 `chart.height` 含图例，timescale 的 `height` 只是绘图区。并排等高用 card-mod 的 `ha-card`，不要把两个数字写成一样。
- 保存后圆环可能缩在角落。配置没变，拖一下窗口让它重算。
- 无线 AP 曾有单点 976 W，会把基础负载的 y 轴顶飞。未查。
- `/energy` 的马桶换气仍是 Matter 积分 `sensor.wei_sheng_jian_ma_tong_huan_qi_dian_yuan_energy`，不是这颗 Zigbee 电量。能源面板也没有主网络、无线 AP。

**改法：** WS `lovelace/config` 读、`lovelace/config/save` 写。勿改 `.storage/`。
用 [`scripts/ha-ws-client.py`](../scripts/ha-ws-client.py)（supervisor 镜像里的 python3 + `SUPERVISOR_TOKEN`，不要 `-v /tmp`）。
min_max 在 HA 2026.9 没有 WS `config_entries/options/flow`，走 supervisor 的
`POST /core/api/config/config_entries/options/flow`。`scribe.yaml` 已是 `record_states: true`，新传感器不用改它。
`sensor.quick_wen_cha` 在 `templates/quick_sensors.yaml`，`template.reload` 即可，不用重启 Core。

**回滚：** 计量改动前
`.lovelace-backups/dashboard-quick-20260923-080213-pre-meter-plug.json`
（SHA-256 `a30b200350923633ddde0f2f071f2b75f0f37b347da4dd9a688da295dd8c8f35`）。
布局和卡 JS：`dashboard-quick-20260921-pre-titles.json` +
`timescale-plotly-card.js.bak-20260921-pre-dayfix`。
还原 JSON 用 WS save。改过卡 JS 要把资源 `?v=` 再 bump。

### 地图仪表盘：CARTO keyed tiles via `custom:map-card` (verified 2026-08-30, W1N-261)

- **背景:** CARTO 自 2026-08-26 起对无 key 栅格瓦片打 "API KEY REQUIRED"
  水印，内置地图卡/zone 编辑器全部受影响。Core 2026.8.3 的 `MapCardConfig`
  **没有任何瓦片配置项**（frontend 20260729.7 源码核对：
  `setup-leaflet-map.ts` 硬编码 CARTO voyager URL）。上游修复是 2026.9.0b1
  起改用 OSMF 矢量瓦片（frontend PR #53816），stable 预计 2026-09-02 前后。
- **变更:** 「地图」仪表盘（url_path `map`，storage）唯一 map 卡替换为
  `custom:map-card`（[nathan-gs/ha-map-card](https://github.com/nathan-gs/ha-map-card)
  **v1.16.0**，手动安装非 HACS）：`tile_layer_url` =
  `https://{s}.basemaps.cartocdn.com/rastertiles/voyager/{z}/{x}/{y}.png?key=<CARTO_KEY>`
  （配 `tile_layer_options: {subdomains: abcd, maxZoom: 20}` + OSM/CARTO
  attribution）。实体不变：2 person + 4 zone（zone 用 `display: icon` +
  `circle: auto`，circle 读实体 `radius` 属性画半径圈）。
- **CARTO key 是 secret**: 只存在于服务端 lovelace 存储（dashboard `map`
  的卡片配置）和用户本人处；勿写入本仓库或 Linear。
- **文件/资源:** `/homeassistant/www/community/ha-map-card/map-card.js`
  （root:root 644，678554 B，sha256
  `f30dfb606e858d2216d5198d8cf758ce956d127006ebd7d66d4329153a247ec2`）；
  Lovelace resource（storage）id `9d2b50b52c60420d89ebd041f722cf60` →
  `/hacsfiles/ha-map-card/map-card.js`，type module（WS
  `lovelace/resources/create`，2026.8 参数名 `res_type`）。升级 = 手动替换
  该文件（不在 HACS 管理下，浏览器需强刷）。
- **备份:** `/homeassistant/.lovelace-backups/dashboard-map-map-20260830-133714.json`
  （还原 = 把备份里的 `views[0].cards[0]` 写回后再 WS `lovelace/config/save`
  url_path `map`）。
- **验证 8/30:** 同瓦片无 key=水印 / 带 key=干净（256×256 PNG 视觉对比）；
  resource HTTP 200 text/javascript；WS 读回卡片配置（type/entities/key/
  attribution/options）全部符合；HA 主机 `curl -4` 带 key 瓦片 200。
- **Follow-up:** Core 现为 2026.9.3（2026-09-23）。内置地图是否已切 OSMF
  矢量瓦片没有复查；本仪表盘仍用 keyed CARTO 的 `custom:map-card`。

## Known issues

**Bluetooth hci0 instability — RTL8821CS (verified 2026-08-13, W1N-74):**
The local Bluetooth controller hci0 is an **RTL8821CS** combo chip on the
x88 Pro board. Kernel logs show recurring `hci0: hardware error 0x00`,
`Opcode 0x200c tx timeout` (HCI_LE_Set_Scan_Parameters), `Unable to disable
scanning: -110`, `Peer device has reset` — the chip hardware-stalls during
active scanning. HA's `bluetooth_auto_recovery` power-cycle then times out
after 5 s and retries every ~2 min:
`bluetooth_auto_recovery.recover: Could not reset the power state of the
Bluetooth adapter hci0 ... due to timeout after 5 seconds`. The HAOS image
already ships custom systemd units to cope (`x88-bt-hci-recovery.service` and
a "Patch HA Bluetooth scanner mode for x88 RTL8821CS" service, visible in host
journal). **No user impact:** there are **no BLE entities** in HA
(xiaomi_ble / bthome / led_ble / bluetooth / esphome domains are all empty;
platforms merely load from stray advertisements). Real IoT devices are Zigbee
(via Zigbee2MQTT) or WiFi/MQTT/cloud. An ESPHome Bluetooth-proxy ESP32
(`/config/esphome/bluetooth.yaml`, bluetooth_proxy: active, WiFi `ubnt-haas`)
is configured but currently offline (ESPHome add-on stopped, port 6053
unreachable) and produced no entities. Follow-up (optional): disable the
local adapter and rely on the ESPHome proxy, or stop the bluetooth
integration entirely.

**eMMC disk lifetime 10% (verified 2026-08-13, W1N-76):** `ha host info`
reports `disk_life_time: 10` — the boot eMMC (`/dev/mmcblk2`, CJTD4R
`0xacacc064`, 64 GB) has ~10% life left. `disk_free: 40.2/56.4 GB`. Full
backup `pre-maintenance-20260813` (slug `411a4ba5`, 144.26 MB) taken
2026-08-13 covers current config; monitor `disk_life_time` on each health
snapshot and plan a disk replacement / data-disk migration before the eMMC
fails.

## Matter Server (verified 2026-08-21)

- Add-on `core_matter_server` (`homeassistant/aarch64-addon-matter-server`) runs the Matter
  commissioner on this host (host networking; add-on container `app_core_matter_server`).
- **After the ISP PD prefix rotates (PPPoE redial), the add-on can cache a stale IPv6 GUA
  in its mDNS advertisement** — clients trying that dead address make Matter
  commissioning/connection fail. Fix: restart the add-on so it re-enumerates addresses:
  `ssh hassio@hass.windy.lan 'sudo -n -i ha apps restart core_matter_server'`
  (`ha addons restart ...` also works; "addons" is deprecated in favor of "apps").
- Verified 2026-08-21 (W1N-207): stale `240e:3bd:234:2f22:*` AAAA in mDNS removed by
  restart; advertisement now carries only current GUA `240e:3bd:235:1fb2:*` + link-local;
  CASE sessions with Aqara M3 / SmartThings hubs resumed over IPv6 link-local.

> **Open items (2026-08-21, W1N-207):** a phone on LAN55 was querying five known
> `_matter._tcp` instances of which only HA answered — the other Matter nodes are
> offline / not announcing (device-side; user to confirm power/Wi-Fi). HA's IPv6
> default route via NetworkManager was observed missing once (curl -6 intermittent,
> while ping6 and `curl -6 --noproxy` work) — not the Matter root cause; re-check
> on the next health snapshot.

Verified 2026-08-23 (read-only, W1N-207): add-on `started`, version `9.0.4`, no
update pending; current GUA `240e:3bd:238:4812:*` (PD rotated again since 08-22)
advertised correctly over v4+v6. Both ESP32-C2 bulbs now announce `_matter._tcp`
(multi-fabric, including this host's fabric `DCE86145C137AF0E`) — but they
**refuse TCP 5540 on IPv4 and IPv6**, so matter-server holds **zero established
:5540 sessions** (device-side failure mode C; no errors logged — see
[docs/matter-pairing-troubleshoot.md §8](../docs/matter-pairing-troubleshoot.md)).

## 马桶换气电源（Matter 插座，半计量）+ 电量估算 (2026-09-13)

Quick 从 2026-09-23 起不再用这颗插座的功率或积分电量，见上方 Quick 节。
下面的积分实体仍是 `/energy` 的第 9 个 grid 源（当日读回）。Matter 开关仍在「灯与开关」。


**设备**：Matter `Smart Plug`（SIXWGH，`model_id 3596`，hw 1.0 / sw 1.3.0），node 18
(0x12)，`device_id 5ef1850953466d6e7a9c6b901fbebe1c`，config entry
`01JF51VQ48PGJGXX3RNAG6MVAA`，区域**卫生间** (`wei_sheng_jian`)，label `power`；
2026-09-13 17:58 CST 配对。实体：
`switch.wei_sheng_jian_ma_tong_huan_qi_dian_yuan`（插座）、
`sensor.…_dian_yuan`（电源 W）、`sensor.…_dian_ya`（电压 V）、
`sensor.…_you_gong_dian_liu`（有功电流 A）、`sensor.…_dian_li`（电力 kWh，
**永久 unknown**）。

**根因（实测 Matter 属性，node 18）**：电量簇 0x0091 `FeatureMap = 13`
(IMPE|CUME|PERE，即**声明**支持导入/累计/周期电量)，但
`CumulativeEnergyImported (0x0001)` 恒为 `null`，`PeriodicEnergyImported
(0x0003)` 带载也恒为 `{Energy: 0}`；`CumulativeEnergyExported (0x0002)`
不存在（EXPE 未声明，自洽）。HA 只用 `CumulativeEnergyImported` 建能量实体
（`components/matter/sensor.py:1083`，`allow_none_value=True`）→ 该实体
**永远不会出数**。**功率计量本身正常**：0x0090 `FeatureMap = 2` (ALTC)，
Voltage / ActiveCurrent / ActivePower 都随负载变化（实测 220.3 V / 118 mA /
24.7 W，HA `电源` 0.0→24.9 W 有历史）。厂商 `update` 实体报无新固件。

**处理（方案 A：功率积分补电量）**：

- 新建 **Integration (Riemann sum) 辅助元素**：config entry
  `01M2D53T188FW8WEC547ENHSVH`（domain `integration`，state `loaded`），
  source `sensor.wei_sheng_jian_ma_tong_huan_qi_dian_yuan_dian_yuan`，
  `method: trapezoidal`、`unit_prefix: k`、`unit_time: h`、`round: 3`、
  `max_sub_interval: 60s`。
- 实体 `sensor.wei_sheng_jian_ma_tong_huan_qi_dian_yuan_energy`（创建时 HA
  自动生成 `…_dian_yuan_ma_tong_huan_qi_dian_yuan_dian_liang`，随后立即
  `config/entity_registry/update` 改名为 `<插座>_energy` 以对齐约定；
  该实体新建、无引用，改名安全），friendly name「马桶换气电源 电力」，
  unit kWh、`device_class: energy`、**`state_class: total`**——能源仪表盘
  允许 `TOTAL` 与 `TOTAL_INCREASING`（`components/energy/validate.py:279`）。
- **能源仪表盘** (`/energy`)：grid 源 `[8]` 由 `…_dian_li` 改为 `…_energy`，
  其余 8 条插座源未动。注意这 9 条「插座」全部以 `type: grid` 注册，被当作
  全屋用电代理；`switch` 卡片所在的 Grid 卡片此前第 9 行是空的，即本次修复点。
- **Quick（已过时）：** 2026-09-13 曾把用电量图指到 `…_energy`，并单独加过开关分区。
  现行 Quick 见上方。不要按本段把 Quick 改回去。

**口径警告**：`…_energy` 是**估算值**（Riemann 积分，只在 HA 运行期间累计、
非账单级），与另外 8 个原生计量插座的累计电量口径不同；功率传感器更新
间隔约 5–10 s（实测 24.9/24.8/25.0 W 抖动），加 `max_sub_interval: 60s`
保证静默时也继续累计。

**Agent 侧建辅助元素的方法（2026-09-13 实测）**：HA 的 config flow 走
**REST**（WS 只有 `config_entries/flow/progress|subscribe`，没有 start）。
经 supervisor 代理即可，无需 HA 长连接/长寿命 token：

```bash
# SUPERVISOR_TOKEN 由 sudo -n -i 提供
curl -s -X POST -H "Authorization: Bearer $SUPERVISOR_TOKEN" \
  -H "Content-Type: application/json" -d '{"handler":"integration"}' \
  http://supervisor/core/api/config/config_entries/flow      # → {flow_id, step_id:"user", data_schema}
curl -s -X POST -H "Authorization: Bearer $SUPERVISOR_TOKEN" \
  -H "Content-Type: application/json" \
  -d '{"name":"…","source":"sensor.x","method":"trapezoidal","round":3,
       "unit_prefix":"k","unit_time":"h","max_sub_interval":{"minutes":1}}' \
  http://supervisor/core/api/config/config_entries/flow/<flow_id>   # → create_entry
```

`auth/long_lived_access_token` 在 supervisor 代理身份下**失败**
（`unknown_error`），故无法用长寿命 token 开浏览器会话；`DurationSelector`
的值是 `{"minutes":1}` 形式（`cv.time_period`）。

**备份/回滚**：`.lovelace-backups/dashboard-quick-20260913-181251-pre-ma-tong-plug.json`
（改动前原件）、`…-20260913-183210-pre-repoint.json`（改名/换源前）；
`.ha-backups/energy-20260913-183135-pre-ma-tong-repoint.json`（能源 prefs）。
回滚能源估算 = 把能源 prefs 的源 [8] 指回 `…_dian_li`。
不要用 2026-09-13 的 Quick JSON 覆盖现在的面板，那会撤掉后来的布局和 Zigbee 计量。
彻底放弃估算电量 = 删除 config entry `01M2D53T188FW8WEC547ENHSVH`。

**验证 (2026-09-13 18:3x)**：`…_energy` 0.002→0.003 kWh 且随 24.6 W 负载
增长（换气扇关掉后回落 0.0 W，累计值保留）；`recorder/list_statistic_ids`
已含该实体；Quick 面板 WS 读回 7 分区、用电量图 11 项指向新实体、旧
`_dian_li` 引用 0 处；能源 prefs 读回 9 源、第 9 条为新实体（Quick 的这次读回只对 2026-09-13 有效；2026-09-23 起 Quick 改指 Zigbee，`/energy` 第 9 源仍是该积分实体）。
**`energy/validate` 已全绿**（9 源 0 issue）：创建后 ~5 min 内曾报
`statistics_not_defined`（recorder 的统计任务周期是 5 min，`statistics_meta`
行由该任务建立），18:39 复核时已自动消失——建辅助元素后**不要**把这条
瞬时告警当作失败。

## Related docs

- [runbooks/home-assistant-maintenance.md](../runbooks/home-assistant-maintenance.md) — `ha` CLI maintenance runbook + [script](../runbooks/scripts/ha-maintenance.sh); custom-component zip install is §7
- [docs/lan-overview.md](../docs/lan-overview.md) — LAN map and gw port-forward
- [hosts/dns.windy.lan.md](dns.windy.lan.md) — `hass.windy.lan` / `hass.local` rewrites