3.4 KiB
To flash the Sonoff ZBDongle-E, follow these detailed steps using the web-based flashing tool. This guide assumes you want to enable the device for use with Zigbee and potentially Thread functionalities.
Step-by-Step Flashing Guide
1. Gather Required Materials
- Sonoff ZBDongle-E: Ensure you have the dongle ready.
- Computer: A PC or Mac with a USB port.
- Firmware File: Download the appropriate firmware for the ZBDongle-E from a reliable source (e.g., GitHub repository).
- Web Browser: Use a Chromium-based browser like Chrome or Edge.
2. Download Firmware
- Go to the GitHub page for Sonoff firmware and download the latest firmware for the ZBDongle-E, such as the Ember firmware or any other desired version (GitHub Repository).
3. Connect the Dongle
- Disconnect the ZBDongle-E from any device.
- Plug it into your computer's USB port.
4. Access the Flashing Tool
- Open your web browser and navigate to the Silicon Labs Firmware Builder.
5. Connect to the Dongle
- Scroll down to find the section for ZBDongle-E.
- Click on the Connect button.
- In the dialog that appears, select your Sonoff dongle from the list and click on the blue Connect button.
6. Select Firmware for Flashing
- After connecting, click on Change Firmware.
- Choose the option to Upload Your Own Firmware.
- Select the firmware file you downloaded earlier.
7. Start Flashing Process
- Click on Install to begin flashing the firmware onto your ZBDongle-E.
- Wait for the process to complete; do not disconnect or close your browser until flashing is finished.
8. Completion and Power Cycle
- Once flashing is complete, a dialog will indicate success. Click on Continue.
- It is recommended to power cycle your dongle by unplugging it and then reattaching it to the USB port.
9. Verify Installation
- After reconnecting, check if your ZBDongle-E is recognized by your system.
- You can also verify its functionality within your smart home setup (e.g., Home Assistant).
Additional Notes
- If you encounter issues connecting or flashing, ensure that you have installed any necessary drivers for your operating system.
- Make sure that no other applications are trying to access the dongle during this process.
By following these steps, you should successfully flash your Sonoff ZBDongle-E, enabling it for use in various smart home applications, including Zigbee and potentially Thread networks.
Citations: [1] https://www.creatingsmarthome.com/index.php/2024/06/14/guide-flashing-sonoff-zigbee-usb-3-0-zbdongle-e-to-use-ember-firmware-with-z2m/ [2] https://docs.homeseer.com/products/updating-firmware-for-sonoff-zbdongle-e-zigbee-usb [3] https://dialedin.com.au/blog/sonoff-zbdongle-e-rcp-firmware [4] https://www.youtube.com/watch?v=3mlu4YluJRs [5] https://www.reddit.com/r/homeassistant/comments/19b6a3d/zigstar_help_flashing_sonoff_usb_dongle_pluse_as/ [6] https://community.home-assistant.io/t/which-firmware-for-sonoff-dongle-e-router/621819 [7] https://community.hubitat.com/t/how-to-flash-sonoff-usb-dongle-to-be-a-zigbee-repeater-router-set-transmit-power/103284 [8] https://www.smarthomejunkie.net/update-the-sonoff-zigbee-dongle-e-easily-how-to/ [9] https://community.home-assistant.io/t/flashing-sonoff-zbdongle-e-to-router-question/725973